Change a Propane Tank
Propane fueled forklifts are commonly used inside warehouses. The lift truck is designed with the propane tank mounted at the rear of the operator. The tanks, which look a lot like beer kegs, have to be replaced from time to time since they have a limited lifespan. Drivers of forklifts must utilize caution when handling propane tanks. Compressed gases are really hazardous, particularly since the gas is flammable. Utilize care when replacing and removing propane tank to avoid being injured.
1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn off the tank valve. The forklift should be left on until the engine dies. This process burns the gas off in the transfer hose which connects the tank and the engine. Prior to taking the second steps, wear the proper safety equipment, like insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 The tank hose needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this occurs, check the connection hose at the nut and the valve area. The connecting nut should be re-tightened if you detect any leaks around the valve area, and then do the leak inspection procedure again. Persistent leaks mean that the connecting hose and nut should be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank would need to be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. After that you could start the forklift and resume working.