It is really essential to use extra caution when utilizing a rough terrain scissor lift. Drivers should be fully aware of the surrounding environment. Long booms on the machines act as levers from the center of the drive unit. For instance, a 6 inch bump can result in a 3 foot bounce when the operator is at the driver controls. Take into account all other traffic nearby, as they might not be aware that you are moving. Plan your assent carefully. Park the boom lift on a flat surface that has no mud or water. These areas conceal deep potholes which could be potentially cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, completely extended. Be sure to only use wooden chalk blocks that are approved.
Lots of lifts work from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump can cause a 3-foot bounce while you are at the driver controls. Consider all other traffic. They might not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas could conceal deep potholes in which the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, fully. Place just approved wooden chalk blocks underneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious hazard for lift operators regardless of what lift is being utilized. Like for example, if the platform driver is not being aware, or if the platform is being controlled by ground employees which could not correctly access proximity to wiring and thus, either the platform itself or the worker could be easily brought into contact with electrical wires. The worker can be electrocuted unfortunately unless correctly insulated.